滑片式压缩机采用传统的、已经得到验证的技术， 以非常低的速度（1450rpm）直接进行驱动，具有wuyu伦比的的可靠性。 转子是惟一连续运行的部件， 上面有若干个沿长度方向切割的槽， 其中插有可在油膜上滑动的滑片。 转子在气缸的定子中旋转。在旋转期间， 离心力将滑片从槽中甩出，形成一个个单独的 压缩室。
The sliding vane compressor adopts the traditional and proven technology to drive directly at a very low speed (1450rpm), which has Wuyu Lun ratio reliability. The rotor is the only part that operates continuously. There are several grooves cut along the length direction, in which sliding blades that can slide on the oil film are inserted. The rotor rotates in the stator of the cylinder. During rotation, the centrifugal force throws the slide out of the groove to form a separate compression chamber.
旋转使压缩室的体积不断减小，空气压力不断增大。 通过注入加压油来控制压缩产生的热量。 高压空气从排气口排出，其中残留的油通过zui终的油分离器予以除去。 压缩能力： 康普艾滑片式 空气压缩机的功率范围为 1.1 kW 至 75 kW （1.5 至 100hp），所产生的工作压力为 7 至 8 和 10 bar （101 至 145psi）。 其典型用途是： OEM、印刷、气动 实验室
Rotation makes the volume of the compression chamber decrease and the air pressure increase. The heat generated by compression is controlled by injecting pressurized oil. The high-pressure air is discharged from the exhaust port, and the residual oil is removed through Zui final oil separator. Compression capacity: the CompAir sliding vane air compressor has a power range of 1.1 kW to 75 kW (1.5 to 100 hp) and produces working pressures of 7 to 8 and 10 bar (101 to 145 psi). Its typical uses are: OEM, printing, pneumatic laboratory