唐山空压机知名厂

搬家搬运与及装卸要求：

Moving, handling and handling requirements:

一，货物装卸应合理规划，遵从下重上轻的基本原则，原则上消费者的物品应直接装车的，若需等待装运，则需要安排专人来负责看管搬家物品。

First, the loading and unloading of goods should be reasonable planning, and follow the basic principle of "heavy, light", in principle, consumer goods should be directly loaded, and if you need to wait for shipment, you need to arrange someone to take care of moving objects.

二，车厢内部的物品应铺有毛毯纸皮等同类保护物品的措施，贵重物品需另外有包装保护。

Two, the inside of the goods should be covered with blankets and other similar items of cardboard protection measures, valuables should also have protective packaging.

三，物品上车应安全合理摆放。

Three, the goods should be placed in a safe and reasonable place.

四，电子产品装卸需尊崇以下原则：

Four, electronic products handling needs to respect the following principles:

1 家电应直立摆放，应车辆等客观原因需要倾斜放置的，倾斜度不可以超过四十五度。

1, appliances should be placed upright, due to objective reasons such as vehicles should be tilted to place, the slope can not exceed forty-five degrees.

2 原则上家电需要原始外包装，无外包装的需要做简单的外表保护处理。

2, in principle, the appliance needs the original outer packing, and the outer packing needs the simple appearance protection.

3 电子产品上不允许有压置重物在其上面。

3 electronic products are not allowed to load weights on top of them.

五，对于易碎物品的装车，应该需要注意以下的几点：

Five, for fragile items loading, we should pay attention to the following points:

1 装车时应有必要的减震处理与保护。

1 when loading, there should be necessary shock absorption treatment and protection.

2 不可以倒放或者侧放，其上不可以放置物品。

2 can not be put on its side or upside down, not to put articles.